|
|
|
 |
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
GGB-150-NC7 GEAR GRINDING MACHINE 齒輪研磨機
齒輪研磨機，齒輪研磨機，齒面研磨機，CBN 齒面研磨機，齒輪熱處理後變形消除，提昇齒輪精度。
Threaded CBN wheel gear grinder，CBN wheel，gear grinding machine.
|
|
|||||||
|
| ■主要仕樣 | |||||
| 工作物 Work Gear | |||||
| 最大工件加工外徑 | Max. Workpiece Diameter | mm | 150 | ||
| 最大工件的齒寬 | Max. Workpiece face width | mm | 50 | ||
| 工件模數 | Workpiece module | 0.6~2.0 | |||
| 工件最大回轉數(W軸) | Max. Wheel Spinale speed | mim-1 | Max.20000 | ||
| 進刀軸X軸 Radial infeed: X-axis | |||||
| 行程 | Traverse length | mm | 250 | ||
| 進給速度 | Feed rate | mm/min | 10 | ||
| 上下頂心距離 | Center distance between tail&stocks | mm | 350 | ||
| 砂輪主軸頭 Grinding wheel head | |||||
| 砂輪外徑 | Grinding wheel outer diameter | mm | Max.275 | ||
| 砂輪寬度 | Grinding wheel face width | mm | 125 | ||
| 砂軸輪回轉速度 | Grinding wheel speed | mim-1 | Max.8,000 | ||
| 砂軸輪回轉角度(A軸) | Grinding wheel head swivel angle | deg | 正負40度 | ||
| 角度設定單位 | Angle increment | deg | 0.001 | ||
| 主軸上下 Z軸 Axial infeed Z-axis | |||||
| 進給行程 | Infeed travle Max | mm | 300 | ||
| 快速移動速度 | Rapid traverse rate | mim-1 | 10 | ||
| 馬達 Motor | |||||
| 砂輪進給用(X軸) | Radial infeed: X-axis | kw/AC(hp) | 4.5 | ||
| 砂輪位移用(Y軸) | Shift slide :Y-axis | kw/AC(hp) | 4.5 | ||
| 砂輪進上下用(Z軸) | Axial infeed :Z-axis | kw/AC(hp) | 4.5 | ||
| 砂輪旋轉用(A軸) | Head swivel :A-axis | kw/AC(hp) | 2.5 | ||
| 工件驅動用(C軸) | Workgear:C-axis | kw/AC(hp) | 11 | ||
| 研削液噴嘴移動(X1軸) | Grinding nozzle adjustment: X1-axis | kw/AC(hp) | 0.5 | ||
| 砂輪驅動用(B軸) | Grinding spindle : B-axis | kw/AC(hp) | 11 | ||
| 油壓幫浦 | Hydraulic power | kw(hp) | 2.2 | ||
| 研削液用幫浦 | Coolant pump motor | kw(hp) | 3.7 | ||
| 切屑分離輸水 | Coolant separator | kw(hp) | 0.1 | ||
| 本機重量 | Weight | kg | 7000 | ||
| 佔地面積 | Floor Space :Width×Length×Height | mm-1 | 2075×2400×2300 | ||